Product application:
DTSP-40 2P DC SPD Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system).These units must be installed in parallel on the dc networks to be protected and provide commonand different modes protection. Its installed location are recommended at both ends of the dcpower supply line (solar panel side and inverter / converter side), especially if the line routing isexternal and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Specifications:
| Product model | DTSPG40-2 (R) | DTSPN40-2 (R) | DTSPT40-2 (R) | |
| Electrical | ||||
| Maximum Continuous Operating DC Voltage (DC+)- PE, (DC-)- PE | Ucpv | Ucev | 600V | 1000V | 1500V |
| Ucev | - | 1000V | 1500V | |
| Nominal Discharge Current (8/20 μs) | n | 20KA | ||
| Impulse Discharge Current (10/350 μs) | Imp | 6.25KA | ||
| Total Discharge Current (10/350 μs) | Total | 12.5KA | ||
| Total Discharge Current (8/20 μs) | Total | 40KA | ||
| Maximum Discharge Current (8/20 μs) | max | 40KA | ||
| Voltage Protection Level (DC+)-PE, (DC-)-PE | Up | 2200V | 4000V | 5200V |
| Up | - | 4000V | 5200V | |
| Response Time | tA | <25ns | ||
| Short-Circuit Current Rating | SCPV | 1000A | ||
| Number of Ports | 1 | |||
| Mechanical & Environmental | ||||
| Operating Temperature Range | -40'F to +158*F [-40°C to +70°C] | |||
| Permissible Operating Humidity | 5%.. .95% | |||
| Atmospheric pressure and altitude | 80k Pa ..106k Pa/ -500m .. 2000m | |||
| Terminal Screw Torque | 39.9 Ibfin [2.0~2.5 N.m] | |||
| Conductor Cross Section (max) | 2 AWG (Solid, Stranded) / 4 AWG (Flexible) | |||
| 35 mm?(Solid, Stranded)/ 25 mm2 (Flexible) | ||||
| Mounting | 35 mm DIN Rail, EN 60715 | |||
| Degree Of Protection | IP20 (built-in) | |||
| Housing Material | Thermoplastic: Extinguishing Degree UL 94 V-0 | |||
| Thermal Protection | Yes | |||
| Optional RC Switching Capacity | Green: ok / Red: failure | |||
| Remote Contacts (RC) | Optional | |||
| RC Switching Capacity | AC:250V /0.5A;DC:250V/0.1A;125V/0.2A;75V/0.5A | |||
| RC Conductor Cross Section (max) | 16 AWG (Solid)/ 1.5 mm²(Solid) | |||
Feedback
